Paragon 2-piece Rotors (Rear Pair) for Honda Civic Type R FK8/FL5 / Integra Type S DE5
Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking under harsh track condition.
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.
Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then Mil-spec Type III black hardcoat/hard anodized to increase resistance to wear and corrosion. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.
-
Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
-
2-piece design
-
Minimizing brake fade & judder during extended sessions
- Weighs 8.8 lbs (4 kg) - save 3 lbs of unsprung weight per rotor vs. OEM
- Rotor to hat mounting system: Fixed hat, non-floating (8 bolt)
SPECS:
Diameter: 305mm (12.01")
Thickness (new): 11mm (0.43")
Thickness (min.): 9mm (0.35")
Type: 2-piece non-floating
Face Pattern: Slotted
Vented / Solid: Solid
Number of Vanes: N/A
Hat Material: 6061-T6 aluminum
Friction Ring Material: CM-250 high carbon alloy cast iron
Rotor Finish: CBN turned
Weight (per rotor): 8.8 lbs (4 kg)
FITMENT:
2017-2021 Civic Type R FK8 (10th Gen)
2023+ Civic Type R FL5 (11th Gen)
2024+ Acura Integra Type S DE5
CROSS REFERENCE:
OEM Honda 42510-TGH-A00
Brembo 08.D713.11
EBC USR2163/D2163/SG2163/GD2163
Centric/StopTech 120.40101/121.40101/320.40101
Girodisc A2-166
DBA 3701E / DBA43701S
Dixcel 3355126
FINISH OPTIONS:
Mil-Spec Hard Coat Anodize
Mil-Spec Black Hard Coat Anodize
*Hard anodized (clear) hats will not discolor under extreme heat, and are highly recommended for track/race applications. Black hardcoat anodized (dyed) hats are more prone to discoloration under extreme heat (> 500F / 260C).
**Some finishes may be on back order, if you need immediately, contact us to confirm**
INCLUDES:
One pair of Paragon Performance 305mm x 11mm (12.01” x 0.43”) 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats (assembled and ready to install)
2-piece Rotor Installation Instructions Download