Paragon 2-piece Rotors Rear Pair 282mm x 12mm (11.10” x 0.47”) - Honda S2000
Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking under harsh track condition.
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.
Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then Mil-spec Type III black hardcoat/hard anodized to increase resistance to wear and corrosion. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.
-
Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
-
Floating 2-piece design
-
Minimizing brake fade & judder during extended sessions
- Weighs 7.91 lbs (3.59 kg) - save ~2 lbs of unsprung weight vs OEM
- Rotor to hat mounting system: D-Bobbin (short) - 8 bolt
SPECS:
Diameter: 282mm (11.10")
Thickness (new): 12mm (0.47")
Thickness (min.): 10mm (0.39")
Type: 2-piece floating
Face Pattern: Slotted
Vented / Solid: Solid
Number of Vanes: N/A
Hat Material: 6061-T6 aluminum
Friction Ring Material: CM-250 high carbon alloy cast iron
Rotor Finish: CBN turned
Weight (per rotor): 7.91 lbs (3.59 kg)
FITMENT:
Honda S2000 AP1, AP2, CR
CROSS REFERENCE:
OEM Honda 42510-S2A-000 / 42510S2A000
Brembo 08.9092.11
EBC GD7089 / D7089 / USR7089
Centric/StopTech 120.40050 / 320.40050
DBA 483 / 4483S
Mugen 43250-XGS-K0S0
FINISH OPTIONS:
Mil-Spec Hard Coat Anodize
Mil-Spec Black Hard Coat Anodize
*Hard anodized (clear) hats will not discolor under extreme heat, and are highly recommended for track/race applications. Black hardcoat anodized (dyed) hats are more prone to discoloration under extreme heat (> 500F / 260C).
**Some finishes may be on back order, if you need immediately, contact us to confirm**
INCLUDES:
One pair of Paragon Performance 282mm x 12mm (11.10” x 0.47”) 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)
Detailed installation manual
2-piece Rotor Installation Instructions Download