{"product_id":"ap-racing-big-brake-kit-4-piston-honda-s2000","title":"AP Racing \/ CS Big Brake Kit (4 Piston) - Honda S2000","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eCLEARANCE ITEM\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAP Racing \/ CS Big Brake Kit. This 4 piston is a perfect setup for street and track duty. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFeatures AP Racing \u003cspan style=\"direction: ltr;\"\u003e CP9440\u003c\/span\u003e 4 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e330 x 28mm rotor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFully-floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/li\u003e\n\u003cli\u003eRecommended usage: Street \/ Track\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eOne pair of AP Racing \u003cspan style=\"direction: ltr;\"\u003e CP9440\u003c\/span\u003e 4 piston calipers\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOne pair of f\u003c\/span\u003e\u003cspan\u003eully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOne set of Paragon P3 \"Street\/Track\" semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2000-2009 Honda S2000 (AP1 \/ AP2) Front\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All big brake kits are custom made\/packaged to order, and cannot be returned.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e**330mm brake kits generally require 17\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 PISTON CALIPER:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBenefits from a radical asymmetric design concept.\u003c\/li\u003e\n\u003cli\u003eSuperior dynamic performance.\u003c\/li\u003e\n\u003cli\u003eIncreased stiffness.\u003c\/li\u003e\n\u003cli\u003eForged, two piece aluminium alloy body.\u003c\/li\u003e\n\u003cli\u003eRadial mount, 152.0mm x 44.0mm centres.\u003c\/li\u003e\n\u003cli\u003eSuits Ø330.0mm or 315.0mm x 28mm thick disc.\u003c\/li\u003e\n\u003cli\u003eStainless Steel Pistons.\u003c\/li\u003e\n\u003cli\u003eHigh temperature seals.\u003c\/li\u003e\n\u003cli\u003e4lb Anti-knockback springs fitted.\u003c\/li\u003e\n\u003cli\u003eStainless Steel wear plates.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFLOATING 2-PIECE ROTOR:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFeatures directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCURVED DIRECTIONAL VENTILATION VANES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0263\/6185\/6051\/files\/directional-ventilation-vanes-paragon-performance.jpg?v=1748454187\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARD ANODIZED ALUMINUM HATS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFLOATING BOBBINS AND MOUTING SYSTEM:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0263\/6185\/6051\/files\/t-bobbin-floating-disc-paragon-performance.jpg?v=1748454345\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCALIPER MOUNTING BRACKETS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePARAGON BRAKE PADS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003ePA055 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/paragon-brake-pad-compounds\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan\u003e \u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGOODRIDGE STAINLESS STEEL BRAIDED BRAKE LINES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"CHECKERD SPORTS","offers":[{"title":"Default Title","offer_id":54491751416118,"sku":"CS-AP5000R-S2K-BBK","price":4000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0263\/6185\/6051\/files\/FullSizeRender_24e49c19-3473-4787-8e01-8fb85814bc70.heic?v=1788216005","url":"https:\/\/www.checkerdsports.com\/products\/ap-racing-big-brake-kit-4-piston-honda-s2000","provider":"Checkerd Sports","version":"1.0","type":"link"}